Jay Hydraulic

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

• Maximum Operating Pressure: 315 bar (4570 psi).

• Maximum Flow Rate: Up to 120 L/min (approx. 32 GPM).

• Mounting Pattern: CETOP 05 / NG10 (ISO 4401-05-04-0-05).

• Switching Time: Approx. 40ms to 60ms (DC solenoids).

• Weight: ~4.6 kg (10.1 lbs).

• Max Operating Pressure (P, A, B): $350 \text{ bar}$ ($5076 \text{ psi}$)

• Max Tank Port Pressure (T): $210 \text{ bar}$ ($3045 \text{ psi}$)

• Max Flow Rate: Up to $80 \text{ L/min}$ ($21 \text{ GPM}$) depending on the spool and pressure drop.

• Mounting Pattern: ISO 4401-03-02-0-05 (CETOP 3).

The "J" spool is a 4/3 directional valve (4 ports, 3 positions).

• Neutral (Spring Centered): All ports (P, A, B, T) are blocked. This is commonly used to "lock" a hydraulic cylinder in place when the solenoids are not energized.

• Solenoid "a": P connects to B, A connects to T.

• Solenoid "b": P connects to A, B connects to T.

Unlike the standard NBR (Nitrile) seals found in most valves, this unit uses FKM (Viton). This makes the valve compatible with:

• High temperatures: Operates effectively in environments hotter than standard NBR can handle.

• Special Fluids: Resistant to phosphate ester-based fire-resistant fluids (HFD-R) and specific synthetic oils.

The 7X series is the modern iteration of the WE6 valve. It features optimized flow channels that reduce pressure drop and improve switching reliability compared to the older 6X series.

• Maximum Operating Pressure: 350 bar (5076 psi).

• Maximum Flow Rate: Up to 80 L/min (21 gpm) — Note that "J" spools may have specific performance limits (switching power limits) depending on the flow/pressure combination.

• Switching Times: Approx. 45–65 ms (DC solenoids are generally slightly slower than AC, but offer smoother operation).

We have highly acknowledged organization Engaged inpresenting a remarkable range of rexroth Hydraulic servo Valve